بلوزات جديدة بالباترون غير مترجم . . . . .

المقاس : - 33 ( 35 – 37 – 39 )

أبدئى بــ 79 سلسله أو ( 84 – 89 – 91 )

السطر 1 : - عمود فى خامس سلسله من الإبرة – سلسله – نترك سلسله – عمود فى السلسله التالية – سلسله – نترك سلسله عمود فى كل من ال5 سلسله أو ( 5 – 5 – 6 ) * ( سلسله – نترك سلسله – عمود فى السلسله التالية ) " مرتين " – سلسله – عمود فى كل من ال5 أو ( 5 – 5 – 6 ) سلسله – كررى من * " 4 مرات " ** - ( سلسله – نترك سلسله – عمود فى السلسله التالية ) " مرتين " ** - سلسله - نترك سلسله – عمود فى كل من ال5 أو ( 5 – 5 – 6 ) سلسله – كررى من بين ** " مرة " سلسله – نترك سلسله – عمود فى أخر سلسله – لفى العمل

السطر 2 – 4 سلسله ( تعد كأول عمود وسلسله ) نترك فراغ سلسله – ( عمود فى العمود التالى – نترك فراغ السلسله التالية – سلسله ) " مرتين " – عمود فى كل من ال5 أو ( 5 – 5 – 6 ) عمود التالية - * ( سلسله – نترك فراغ سلسله – عمود فى العمود التالى ) " مرتين " – سلسله – نترك فراغ سلسله – عمود فى كل من ال5 أو ( 5 – 5 – 6 ) عمود التالية – كررى من * " 4 مرات " – ( سلسله – نترك فراغ سلسله – عمود فى العمود التالى ) " مرتين " – سلسله – نترك فراغ سلسله - عمود فى كل من ال5 أو ( 5 – 5 – 6 ) عمود التالية - ( سلسله – نترك فراغ سلسله – عمود فى العمود التالى ) " 3 مرات " – لفى العمل
كررى السطر 2 " 4 مرات "
Establish Body Pat

السطر التالى : - 4 سلسله – نترك فراغ سلسله – ( عمود فى العمود التالى – نترك فراغ سلسله – سلسله ) " مرتين " – عمود فى كل عمود وفراغ سلسله بالسطر إلى أخر 3 فراغ سلسله – ( سلسله – نترك فراغ سلسله – عمود فى العمود التالى ) " مرتين " – سلسله – عمود ثانى سلسله من لفة السلسله – لفى العمل

Rep this row until piece measures 11” from beg, inc 1 dc in center of last row.

كررى هذا السطر من بداية تناقص العمود فى وسط من أخر السطر
Establish Top Pat:

السطر 1 : - 4 سلسله – نترك فراغ سلسله – ( عمود فى العمود التالى – نترك فراغ سلسله – سلسله ) " مرتين " – ( عمود فى العمود التالى – نترك العمود التالى – سلسله ) " 10 أو ( 11 – 11 – 12 ) مرة " عمو فى ال5 أو ( 6 – 7 – 7 ) عمود - * ( نترك العمود التالى – سلسله – عمود فى العمود ) " مرتين " – نترك العمود التالى – سلسله * - عمود فى ال5 أو ( 5 – 7 – 7 ) عمود – كررى ما بين العلامتين * " مرة " - عمود فى ال5 أو ( 5 – 7 – 7 ) عمود – نترك العمود التالى – سلسله - ( عمود فى العمود التالى – نترك العمود التالى – سلسله ) " 12 أو ( 13 – 23 – 14 ) مرة " – عمود فى ثانى سلسله من لفه السلسله – لفى العمل

السطر 2 : - 4 سلسله – نترك فراغ سلسله – ( عمود فى العمود التالى – نترك فراغ سلسله – سلسله ) " 12 أو ( 13 – 13 – 14 ) مرة " – عمود فى ال5 أو ( 5 – 7 – 7 ) عمود – * ( نترك فراغ سلسله – سلسله – عمود فى العمود التالى ) " مرتين " – نترك فراغ سلسله – سلسله * - عمود فى ال5 أو ( 5 – 7 – 7 ) عمود – كررى ما بين * " مرة " - عمود فى ال5 أو ( 6 – 7 – 7 ) عمود – نترك فراغ سلسله – سلسله – ( عمود فى العمود التالى – نترك فراغ سلسله – سلسله ) " 12 أو ( 13 – 13 – 14 ) مرة " – عمود فى ثانى سلسله من لفه السلسله – أغلاق العمل



FRONT
Work same as back until Row 2 of Top Pat has been completed. Fasten off. Turn.

Shape Armholes: Skip 6(7-7-8) ch-1 spaces. Join yarn in next dc, ch 4 (counts as 1 dc and ch-1), skip next ch-1 space, dc in next dc, continue as for Row 2 to last 6(7-7-8) ch-1 spaces. Turn. Work in pat as established for 1 more row. Turn.

Right Strap: Ch 4 (counts as 1 dc and ch-1), skip next ch-1 space, (dc in next dc, skip next next ch-1 space, ch 1) 6 times, dc in last dc.
Work even in pat as established until strap measures 13(13-14-15)” or desired length. Fasten off.

Left Strap: Join yarn in 8th dc in from left edge and work to correspond to right strap.

FINISHING
Sew side seams. Top edging: Join yarn and sc across top edge, from strap to strap, working 1 sc in each dc and ch-1. Repeat across front neck edge.
Try on garment and position straps, adjusting length if necessary. Pin edges of straps to back then sew in place.







MATERIALS: American Thread Dawn Sayelle Knitting Worsted, 4 (5) skeins Honey Beige, 2 skeins Camel, 1 skein Fisherman. Crochet hook size H for misses' medium size; size I for misses' large size, or size required to crochet to gauge. Four buttons, 5/8" in diameter.

GAUGE: 3 pat sts on Back = 1" (H hook); 5 sts = 2" (I hook).

BACK:
أبدئى بـ 55 سلسله
السطر 1 : - حشو فى ثانى سلسله من الإبرة – وفى كل سلسله بالسطر – سلسله – لفى العمل
السطر 2 : - حشو فى خلف الفراغ وفى كل حشو بالسطر – سلسله – لفى العمل
السطر 3 : - حشو فى أمام الفراغ فى كل حشو بالسطر – سلسله – لفى العمل
Repeat Rows 2 and 3 for pattern for Back. Work until 11 rows from beginning. At end of last row cut Camel.
كررى السطر 2 و 3
Row 12: Join Beige and continue in pattern as established. Work until 35 rows, or about 11-1/2" (13"), from beginning.

Shape Armholes: SI St over first 5 sts, work to last 5 sts. Turn. Dec 1 St each edge every row 2 times--40 sts. Work even for 6 rows more. Change to Fisherman, and work until 17 rows from beginning.

Shape Shoulders: SI St over first 5 sts, work to last 5 sts, turn. SI St over 4 sts, work across to last 4 sts. Turn. Repeat last row one time more. Fasten off.

FRONT: To Make Cluster: (Yo and draw up a 1/2" loop) 4 times in same St, yo and through all loops on hook.

MOTIF: Make 1. With Beige, ch 4, join with SI St to form a ring.
Rnd 1: Ch 1, work 16 SC in ring, join with SI St to first SC.
Rnd 2: Ch 2, work cluster in same St as starting ch, * ch 1, SC in next SC, cluster; repeat from * around, join with SI St to top of starting ch--8 clusters.
Rnd 3: Ch 2, cluster in same St, * 2 SC in closing St of cluster on Rnd 1, cluster in ch-1 space; repeat from * around, join.
Rnd 4: SI St in first cluster, ch 4, dc in same St, * between next 2 SC work dc, ch 1, dc, in next cluster work dc, ch 1, dc; repeat from * around as established, SI St in 3rd ch of starting ch.
Rnd 5: SI St in next ch-space, ch 3 for first dc, in same space work 2 dc, ch 1, 3 dc for corner, * (3 dc in next ch-space) 3 times, in next ch-space work 3 dc, ch 1, 3 dc; repeat from * 2 times more, end (3 dc in next ch-space) 3 times, join to top of starting ch-4 corners established.
Rnd 6: SI St to ch-1 space at corner, ch 3 for first dc, in same space work 2 dc, ch 2, 3 dc, * (skip 3 dc, 3 dc between two 3-dc groups) 4 times, in corner work 3 dc, ch 1, 3 dc; repeat from * 2 times more, end (skip 3 dc, 3 dc between two 3-dc groups) 4 times, join to top of starting ch.
Rnd 7: Insert hook from back to front to back around each dc post of last rnd and work a post SC in each dc around, work ch 1 at all corners; end by joining with SI St to first SC.
Rnd 8: Ch 3, work cluster in same St, * ch 1, in ch-1 corner work cluster, ch 1, cluster, (ch 1, skip 1 St, cluster in next St) 8 times; repeat from * until 3rd corner has been completed, (ch 1, skip 1 St, cluster in next St) 7 times, draw color Camel through for ch-1, in Camel work cluster, ch 1, corner, ch 1, cluster, draw Beige through for ch 1, complete last side as established, join--one corner, including cluster before and after corner, worked in Camel and the remainder of the square in Beige. (Note: When working Camel corner, work over Beige; and always pick up new color from under dropped color; cut Camel after Beige is picked up again.)
Rnd 9: Ch 1, work * 2 SC in each cluster, in corner work 2 SC, ch 1, 2 SC; repeat from * to 3 clusters before Camel ch-1 corner, draw Camel through on last yo of SC on 4th cluster before corner, 2 Camel SC in each of next 3 clusters, in corner work 2 SC, ch 1, 2 SC, 2 Camel SC in each of next 3 clusters, on last SC draw Beige through on yo, complete last side as established in Beige, join with Sl St.
Rnd 10: Sl St to next space between 2-sc groups, ch 1, * (SC between 2-sc groups, ch 1) to corner, at corner work 2 SC, ch 1, 2 SC; repeat from * to space before beginning of Camel, join Camel as before, ch 1, (SC between 2 SC, ch 1) 4 times, work corner as before, ch 1, (SC between 2 SC, ch 1) 4 times, draw Beige through last ch 1 and complete rnd as established, join.

Rnd 11: SI St to ch-1 space, ch 1, SC in same space, * (ch 1, SC in next ch-1 space) to corner, SC in St before ch-1 corner, ch 1, in corner work 2 SC, ch 1, 2 SC, ch 1, SC in SC immediately after corner; repeat from * to 1 St before Camel corner, with Camel continue around corner as established, continue with Camel 1 St further than last row, complete remainder of last side in Beige.

Rnd 12: SI St to ch-1 space, ch 3, dc in same space as starting ch, * (2 dc in each ch-1 space) to corner, in corner work 2 dc, ch 1, 2 dc; repeat from * to 1 St before Camel corner, working in Camel continue as established to 1 St further than Rnd 11, complete rnd in Beige as established.

Rnd 13: Working color on color, repeat Rnd 7 -- 34 dc on each side.

SIDE PANELS: Note that motif is arranged as a diamond; Beige sides are the top; Beige/Camel sides are bottom.
Top Side Panel 1:
Row 1: Right side facing, join Beige at right-hand corner to work toward top corner, work post SC in each SC to top corner--34 SC, Ch 1, turn.
Row 2: Working in front loop of each SC across, draw up a loop in each of first 2 SC, yo and through 3 loops on hook (1 SC dec), SC in front loop of each SC to last 2 SC, dec 1 sc, as before--1 SC dec each edge. Ch 1, turn.
Row 3: Working in back loop of each SC, dec 1 SC each edge, SC across . Ch 1, turn. Repeat Rows 2 and 3 until all sts are worked off.

Top Side Panel 2: Row 1: Right side facing, join Beige at top corner, work post SC in each SC to next corner. Ch 1, turn. Complete as Top Side Panel 1.

Bottom Side Panel 1: Row 1: Right side facing, join Camel at bottom corner, work post SC in 17 SC, on 17th SC bring Beige through on last yo, work Beige post SC in remaining 17 SC to next corner. Ch 1, turn.
Row 2: Working in pattern same as Top Side Panel 1, SC to 1 St before Camel, bring Camel through on last yo, complete row in Camel. Ch 1, turn.
Row 3: Work in pattern same as Top Side Panel 1, SC to 1 St after Camel, bring Beige through on last yo, complete row in Beige. Ch 1, turn. Continuing to move Camel up one St on each row as established, complete same as Top Side Panel 1.

Bottom Side Panel 2: Row 1: Right side facing, join Beige at 1 remaining side corner, work post sc in 17 sc, on 17th sc bring Camel through on last yo, work Camel post sc on remaining 17 sc to bottom corner. Complete to correspond to Bottom Side Panel 1, working to keep Camel edge straight across bottom of motif.

YOKE: Wrong side facing, join Fisherman along top edge (Beige side), ch 2 for first hdc, work 51 hdc evenly spaced across-52 hdc counting starting ch-2. Ch 1, turn.
Row 2: Working in front loop of each hdc, work sc, in each hdc across. Ch 2, turn.
Row 3: Work hdc in front loop of first 23 sc, skip 2 sc, trc around post of hdc directly below next 2nd skipped sc, working in back of trc just worked, trc around post of hdc of first skipped sc (first cross st made 2 sc left unworked on Row 3), sc in each of next 2 sc (center front), skip next 2 sc, trc around post of hdc below furthest skipped sc, trc around post of hdc below remaining skipped sc, hdc. in front loop of next 23 sc. Ch 1, turn.
Row 4 and All Even-Numbered Rows: Sc in front loop of each sc and each trc across.
Row 5: Sc in back loop of first 23 sc, trc around post of next 2 trc 2 rows below, sc in next 2 sc, 2 trc around post of next 2 trc, complete row as established.
Row 7: Sc in back loop of first 24 sts, skip next st, 1 trc around post of 2nd trc of Row 5, trc around post of skipped trc, skip next st, trc around post of next trc, in back of trc just worked, work 1 trc around post of skipped trc, skip a total of 4 sc at top, sc in back loop of each st across.
Row 9: Sc in back loop of first 24 sts, trc around post of each of next 4 trc, skip a total of 4 sc at center, hdc in back loop to end of row.
Row 11: Work 23 hdc in back loop, skip 1 trc, trc around post of next trc, work in back of trc just made trc around post of skipped trc, skip 2 sc at top,. sc in next 2 sc, skip 1 trc, trc around post of next trc, trc around post of skipped trc, hdc in back loop across. Repeat Rows 5 through 11 for pattern. Keeping to pattern, work until a total of 14 rows have been worked.

Shape Neck and Shoulder: Place a marker on each side of center 14 sts -- 19 sts each side. Working 1 side only and keeping to pattern, dec 1 st at neck edge every row 2 times. At the same time, on Row 16 (wrong side), after 1 st dec at neck edge, work to last 5 sts. Turn.
Row 17: Skip first st, sl st over next 6 sts, work in pattern over remaining 5 sts. Fasten off. Work other side to correspond, reversing shaping.

Side Strip: Join Beige at side edge, 5 rows down from upper right hand corner of square and work in sc to lower corner changing color to Camel to match center motif.
Row 2: Keeping to colors as established, work sc in front loop of each St across, dec 1 St across last 2 sc at end of row (underarm).
Row 3: Keeping to colors, sc in back loop of each St across.
Rows 4 through 7: Repeat Rows 2 and 3. Fasten off. Work other Side to correspond, reversing shaping.

SLEEVES: With Camel, ch 26.
Row 1: Sc in each sc across. Ch 1, turn.
Rows 2 through 8: Repeat Row 1.
Row 9: Working in back loop of each St, work across in sc, increase 14 sts evenly spaced across--39 sc.
Row 10: Working in front loop, sc in each sc ,across.
Row 11: Working in back loop, sc in each sc across.
Rows 12 and 13: Repeat Rows 10 and 11.
Row 14: Keeping to pattern as established, inc 1 St each edge. Repeat Rows 10 through 14 until there are 57 sts. At the same time, when 7" (8") from beginning, change to Beige. Keeping to pattern, work until 18" (19") from beginning.

Shape Cap: SI St over first 3 sts, work to last 3 sts. Turn. Dec 1 St each edge every other row 11 times. At the same time, when 10 rows from beg of cap shaping, change to Fisherman. When all decreases have been made, fasten off.

FINISHING: At lower, edge of front and back, with Camel work 50 sc evenly spaced across for 7 rows. Fasten off. Steam each piece lightly. Sew side seams and right shoulder.

Neckband: Join Fisherman at left corner of front and work same as yoke pattern, working cable over cable pattern for 5 rows. Fasten off.
Along opening at left shoulder and neck edge of back with Fisherman work 3 rows sc. Along front shoulder edge work 4 rows sc, working 4 buttonholes (2 at neck band edge, 2 evenly spaced on shoulder) on Row 3 as follows: work ch 2, skip 2 sts at each marker.
Overlap front crochet trim over back, sew at armhole edge. Sew buttons in place. Sew sleeve seams, sew sleeves in place gathering fullness at top of sleeve.

Skill Level
Intermediate
Finished Size
Instructions given fit 34-inch bust (small); changes for 38-inch (medium), 42-inch (large), 46-inch (X-large) and 50-inch (2X-large) are in .
Finished Garment
Measurement
38 inches
Materials
• 11 (200 yd.) hanks light green super fine (fingering) weight yarn
• No. 3/2.1mm steel hook or hook size needed to obtain gauge
• Eight 3/4-inch buttons
• Tapestry needle
Gauge
28 dc and 15 dc rows = 4 inches.
Basic Stitches
Ch, sl st, sc, hdc, dc, tr
Back
Row 1: Ch 135 , dc in fourth ch from hook, dc in each remaining ch across, turn. (133 dc, counting last 3 chs of foundation ch as first dc)
Rows 2-46: Ch 3 (counts as first dc throughout), dc in each remaining dc across, turn. At end of row 46, fasten off, turn. (133 dc)
Row 47: For underarm shaping, skip first 13 sts, join in next st, dc across to last 13 sts, leave remaining sts unworked, turn. (107 dc)
Rows 48-76 : Ch 3, dc in each remaining dc across, turn. (107 dc)
Row 77 : For back neck shaping and right shoulder, ch 3, dc in each of next 26 dc, dc next 2 sts tog -- decrease made -- turn. (28 sts)
Row 78 : Ch 3, dc in each remaining st across, ch 1, turn. (28 dc)
Row 79 : Sc in each of first 9 dc, hdc in each of next 9 dc, dc in each of next 10 dc. Fasten off. (28 sts)
Note: For beg dc dec, ch 2, dc in next st.
Row 77 : For left shoulder, skip next 49 sts on Back, join in next st, beg dc dec (see Note), dc in each remaining st across, turn. (28 sts)
Row 78 : Ch 3, dc in each remaining dc across, turn. (28 dc)
Row 79 : Ch 3, dc in each of next 9 sts, hdc in each of next 9 sts, sc in each of next 9 sts, fasten off. (28 sts) (32, 35, 35, 40 sts]
Right Front
Row 1: Ch 65 , dc in fourth ch from hook, dc in each remaining ch across, turn. (63 dc, counting last 3 chs of foundation ch as first dc)
Row(s) 2 : Ch 3, dc in each dc across, turn. (63 dc)
Row 3 : Ch 3, dc in each of next 27 dc, ch 4, skip 3 dc, sc in next dc, ch 4, skip 3 dc, dc in each of next 28 dc, turn.
Row 4 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, (ch 4, sc in next sp) twice, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 5 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, ch 4, sc in first sp, ch 4, 4 tr in next sp, ch 4, sc in next sp, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 6 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, (ch 4, sc in next sp) 4 times, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 7 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, (ch 4, sc in next sp, ch 4, 4 tr in next sp) twice, ch 4, sc in next sp, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 8 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, (ch 4, sc in next sp) 6 times, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 9 : Ch 3, dc in each dc to within 2 dc of first ch-4 sp, (ch 4, sc in next sp, ch 4, 4 tr in next sp) 3 times, ch 4, sc in next sp, ch 4, skip 2 dc, dc in each remaining dc across, turn.
Row 10 : Ch 3, dc in each dc to first ch-4 sp, 2 dc in sp, (ch 4, sc in next sp) 6 times, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 11 : Ch 3, dc in each dc across to first ch-4 sp, 2 dc in sp, (ch 4, sc in next sp, ch 4, 4 tr in next sp) twice, ch 4, sc in next sp, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 12 : Ch 3, dc in each dc across to first ch-4 sp, 2 dc in first sp, (ch 4, sc in next sp) 4 times, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 13 : Ch 3, dc in each dc across to first ch-4 sp, 2 dc in sp, ch 4, sc in next sp, ch 4, 4 tr in next sp, ch 4, sc in next sp, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 14 : Ch 3, dc in each dc across to first ch-4 sp, 2 dc in sp, (ch 4, sc in next sp) twice, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 15 : Ch 3, dc in each dc across to first ch-4 sp, 2 dc in sp, ch 4, sc in next sp, ch 4, 2 dc in next sp, dc in each remaining dc across, turn.
Row 16 : Ch 3, dc in each dc across to first ch-4 sp, 3 dc in sp, dc in next sc, 3 dc in next sp, dc in each remaining dc across, turn. (63 dc)
Note: Repeat rows 3-16 for pattern.
Rows 17-46 : Work in pattern.
Row 47: For underarm shaping, work in pattern to within 13 sts, leave remaining sts unworked, turn.
Rows 48-56: Work in pattern.
Neck Shaping
Rows 57-78 : For Neck Shaping, continue to work in pattern until five complete openwork diamonds have been worked, dec 1 st at neck edge every row. After five complete openwork diamonds have been worked, work in dc only. (28 sts at end of row 78)
Row 79 : Ch 3, dc in each of next 9 sts, hdc in each of next 9 sts, sc in each of last 9 sts, fasten off
Left Front
Rows 1 & 2 : Repeat same rows of Right Front.
Row 3 : Ch 3, dc in each of next 27 dc, ch 4, skip 3 dc, sc in next dc, ch 4, skip 3 dc, dc in each of next 28 dc, turn.
Rows 4-46 : Repeat same rows of Right Front. At end of row 46, fasten off, turn.
Row 47: For underarm shaping, skip first 13 sts, join in next st, ch 3, continue in pattern across, turn.
Rows 48-56: Repeat same rows of Right Front.
Rows 57-78 : For Neck Shaping, repeat same rows of Right Front. At end of row 78 , ch 1, turn.
Row 79 : Sc in each of first 9 sts, hdc in each of next 9 sts, dc in each of last 10 sts, fasten off.
Sleeve (make 2)
Row 1: Ch 69, dc in fourth ch from hook, dc in each remaining ch across, turn. (67 dc, counting last 3 chs of foundation ch as first dc)
Note: While following instructions for sleeve, work increases at each end of row beg on row 2 as follows: 1 st at each end of every row 0 times, then on every second row 21 times, then on every third row 9 times for a total of 69 rows, then work 7 rows without increasing for a total of 76 rows and 127 dc at end of last row.
Rows 2-4: Ch 3, dc in each remaining st across, increasing as indicated for size being worked.
Row 5: Ch 3, dc in first st for sizes large, X-large and 2X- large only (inc made), dc in each of next 31 sts, ch 4, skip 3 sts, sc in next st, ch 4, skip 3 sts, dc in each of next 32 sts, dc in same st as last st for sizes large, X-large and 2X-large only (increase made), turn.
Rows 6-76: Work in openwork diamond pattern as established on Right and Left Fronts, increasing as indicated for size being worked until five openwork diamonds have been completed, then work in dc only. At end of row 76, fasten off.
Assembly
Sew shoulder seams. Matching center of sleeve top to shoulder seam, set in sleeves. Sew side and sleeve seams.
Front Band
Row 1 (right side): With right side facing, join in bottom corner of Right Front, ch 1, work 2 sc over end st of each row to beg of Neck Shaping, 2 sc in st at beg of neck opening, sc evenly sp around neck opening to top corner of Left Front, 2 sc in corner st, 2 sc over end st of each row to bottom corner of Left Front, ch 1, turn.
Rows 2-4: Sc in each sc across, working 2 sc in each corner sc, ch 1, turn.
Row 5 (buttonhole row): Sc in each of first 6 sc, ch 4, skip 4 sc, (sc in each of next 10 sc, ch 4, skip 4 sc) 7 times, sc in each sc to neck corner, 2 sc in corner sc, sc in each sc to bottom Left Front, working 2 sc in second neck corner sc, ch 1, turn.
Row 6: Sc in each sc and in each ch st across, working 2 sc in each neck corner sc, ch 1, turn.
Rows 7-9: Repeat rows 2-4. At end of row 9, fasten off.
Bottom Edging
With right side facing, join in bottom corner of Left Front in first st to right of Front Band, ch 1, sc in same st, (ch 5, sc in second ch from hook, hdc in next ch, dc in next ch, tr in next ch, skip 2 sts on sweater bottom, sc in next st) across, adjusting number of sts skipped at end of row, if necessary, to end with sc in last st before Front Band. Fasten off.
Sleeve Edging
With right side facing, join in first st after sleeve seam, work as for Bottom Edging, ending with sl st in first sc. Fasten off.
Sew buttons on Left Front Band opposite buttonholes on Right Front Band.






Gauge: 1 diagram = approx. 9 cm in width. 12 rows of Pattern 2 = approx. 10 cm in height.

Pattern: See chart . The pattern is seen from the right side. The chart is placed sideways on the page with the bottom of the chart closest to the inner edge of the page. «1 rapport» = «1 repeat».

= ch 1
= 1 sc
= 1 sl st
= 1 dc

= 1 bobble. * wrap yarn around hook, insert hook in sc from previous row and pull up yarn *, repeat * - * 3 times = 6 loops + 1 st on hook. Wrap yarn around hook and pull through all loops + st (= 1 st remains on hook).

= 1 petal. (4 petals make 1 flower). Start at point of arrow, * wrap yarn around hook, insert hook in st at the other end of arrow and pull up yarn *, repeat * - * 3 times = 6 loops + 1 st on hook. Wrap yarn around hook and pull through all loops and st on hook (= 1 st remains on hook).

= ch 1 to turn piece.

Note: All measurements in pattern refer to the garment when held up or worn, because the pattern pulls in and lengthens.

Body: Ch 201-241 loosely. Turn and crochet Pattern 1 once across row (10-12 repeats = 60-72 ch-st bows). Then crochet Pattern 2 on the next row and repeat a total of 5 times, the piece measures approx. 20 cm . Crochet Pattern 3. At the same time when the piece measures approx. 32-35 cm divide and crochet each part of Body separately. Each front = 2 repeats; back = 4 repeats, bind off 1-2 repeats at each side for armhole.

Right front: Continue with Pattern 3 over 2 repeats starting at center front. When the piece measures approx. 42-46 cm (adjust to finish after 1 flower) continue with Pattern 3 but do not make flowers. At the same time shape the neck as follows: Crochet until 2 ch-st bows remain at center front. Turn and crochet back. Then crochet over 1 less ch-st bow at neck edge of every other row 3 times. Continue to crochet in pattern until the piece measures 52-56 cm , fasten off.

Left front: Crochet the same as right front, reversing all shaping.

Back: Continue to crochet Pattern 3 until piece measures approx. 42-46 cm , then crochet the rest without flowers (as on front). When the piece measures approx. 49-53 cm crochet the next row as follows: 7 ch-st bows = shoulder, sc over the following 10 ch-st bows = neck (crochet 1 sc in every ch-st bow and 1 sc in every sc between bows), 7 ch-st bows = shoulder. Finish with 1 row of ch-st bows on each shoulder. The piece measures approx. 52-56 cm , fasten off.

Sleeve: Ch 51-51 loosely. Turn and crochet Pattern 1 once across row (2.5 repeats = 15 ch-st bows), then crochet Pattern 2 twice, then continue in Pattern 3. When the piece measures approx. 10 cm inc 1 ch-st bow at end of row on alternately right and left side of piece a total of 8-10 times alternately every 3 and 4 rows - make inc by ch 4, then 1 sc in the last sc from previous row = 23-25 ch-st bows on row. Continue until piece measures approx. 52-54 cm . Then crochet over 1 less ch-st bow at end of every row until the piece measures 56-58 cm , fasten off.

Assembly: Crochet together shoulder seams as follows: * 1 sc in first ch-st bow on front, ch 1, 1 sc in first ch-st bow on back, ch 1 *, repeat from * - * on each shoulder. Crochet together the sleeve as follows from bottom edge: * 1 sc in one side, ch 2, 1 sc in *, repeat from * - * until approx. 5-9 cm remains. Crochet sleeves to Body in the same way as sleeves were crocheted together. Crochet 1 row sc along both button bands and around the neck - crochet snugly around the neck so that the neckline will not sag.

Buttonhole loops: Make 3 buttonhole loops along right front. Start at top edge: * 1 sc, ch 3, fasten with 1 sc 1 cm below, sl st approx. 8-9 cm lower on band * repeat from * - * until there are 3 loops. Sew on buttons on left front.

Materials:
Steel hook 0.90 mm (BATES 13)
800gr. of cotton thread Patons, No.15
Thread size:
50 gr.=330m
Finishing Materials:
Tapestry needle
Finished Size: 57 cm wide - 87 cm long
Gauge: The motif measures 5,50 cm across. Be sure to check your gauge before starting garment. Use any size hook which will obtain the motif measurements above.
Directions:
Motif:
Rnd 1: 9 ch, sl st into the first ch to form a ring. Ch 3 (counts as first dc), make 15 dc into the ring; sl st into the 3rd ch of the first dc.
Rnd 2: 6 ch, make a trc into the top of the next stich; *2 ch, trc in the next stich; repeat from * around (13 more times); then 2 ch, sl st into 4th ch of the original ch-6 made at the beginning of this round (there are now 16 spaces around).
Rnd 3: sl st into the next space; 4 ch, make 3 trc into the same space, *make 4 trc into the next space, repeat from * around (14 more times); sl st into the 4th ch of the original ch-4 made at the beginning of this round.
Rnd 4: 3 ch, dc into the joining space; *4 ch, skip 3 trc, make 2 dc into the next stich; repeat from * 14 times more; 4 ch, sl st into the 3rd ch of the original ch-3 made at the beginning of this round.
Rnd 5: 3 ch, dc into the joining space; 3 ch, make 2 dc into the next stich; *1 sc over the ch-4 loop, 2 dc into the next stich, ch 3, 2 dc into the next stich; repeat from * 14 more times; then sc over the last ch-4 loop, sl st into the 3rd ch of the original ch-3 made at the beginning of the round. Fasten off and secure ends.
Joining motifs and creating filler pattern:
Motifs can be joined together while crocheting the last round. First, complete one motif entirely. Then in working the last round on subsequent motifs, join as follows:
When doing the "ch 3" to form a point on the currently worked motif, ch 1, sl st into the ch-3 space on the second motif, then ch1 again and continue with the 2 dc on the current motif (according to the pattern-rnd 5). Do the same on the next point, joining it to the matching ch-3 space on the second motif. Follow this technique and create an entire strip of motifs. Then create a second strip similarly and use the "sewing technique" to attach the matching points of the two strips together. You have 16 points on each motif. Join two on the upper part, two on the righ, 2 on the left and 2 down on each big circle motif. There are 8 points left to fill the spaces. Once all the desired motifs have been crocheted and joined, create the filler pattern as follows:
Note:
This pattern will be done in every large space that exists at the joining of four motifs. There will be 2 points on each of the joined motifs - 8 points total - that will have to be "filled in and joined" via the special filler pattern.
Ch 5, sl st into the first ch to form a ring. Do 8 single crochet stiches into the ring; *ch 4, sl st into the ch-3 point of a motif, ch 4, sl st into the single crochet of the filler pattern. Repeat from * seven more times, creating a chain that connects to every one of the 8 points.
Finishing:
Make 10 motifs wide by 16 long for back, 4 motifs wide by 16 motifs long for left front and same for right front, 8 motifs wide and 9 motifs long for each sleeve. There are no sewing, just join the motifs as I described. You'll notice 2 holes under both arms. Fill it with 2 filler motifs. 3 points of each of these 2 "filler motifs" are joined with a big motif, but 1 point is joined with the other point of the second "filler motif". When you finish the cardigan, put the wet towel on it and iron it (especialy the edges).







Crochet gauge: 10 tc x 4.5 rows with 1 strand Muskat + 1 strand Viscose = 10 x 10 cm.

Crochet info-1: At the beginning of each row ch 4 replaces 1 tc and every row ends with 1 sl st in the ch 4 (1st tc) at beginning of row.
Crochet 1 tc in each tc from previous row – do not crochet between tc.

Crochet info-2: Front, back and sleeves are first crocheted in the round and then back and forth, so there is a small structural change.

Stripes: Crochet 2 rows in each color combination.

Stripe pattern-Body:
Burgundy Muskat nr 41+ rust Cotton Viscose.
Coral Muskat nr 40 + rust Cotton Viscose.
Red Muskat nr 12 + rust Cotton Viscose.
Rust Muskat nr 21 + rust Cotton Viscose.
Dark orange Muskat nr 49 + rust Cotton Viscose.
Coral Muskat nr 40 + rust Cotton Viscose.
Red Muskat nr 12 + rust Cotton Viscose.
The piece measures approx. 31 cm.
Repeat stripes to finished measurements.

Stripe pattern-sleeve:
Burgundy Muskat nr 41 + rust Cotton Viscose.
Rust Muskat nr 21 + rust Cotton Viscose.
Dark orange Muskat nr 49 + rust Cotton Viscose.
Terracotta Muskat nr 28 + rust Cotton Viscose.
Rust Muskat nr 21 + rust Cotton Viscose.
Burgundy Muskat nr 41 + rust Cotton Viscose.
Red Muskat nr 12 + rust Cotton Viscose.
Coral Muskat nr 40 + rust Cotton Viscose.
Dark orange Muskat nr 49 + rust Cotton Viscose.
Rust Muskat nr 21 + rust Cotton Viscose.
The piece measures approx. 45 cm. Crochet the rest of sleeves with red Muskat nr 12 + rust Cotton Viscose.

Decreasing tips: Bind off as follows:
At beginning of row: Replace 1 tc with 1 sl st (for each tc you wish to bind off).
At the end of the row: Turn piece when the number of tc you want to bind off remains, then crochet back.

Body: Ch 120-132-144-159-174 with 1 strand burgundy Muskat + 1 strand Cotton Viscose and join into a ring with 1 sl st in 1st ch.
Follow Stripe pattern-Body – see instructions above. Row 1: Crochet 1 tc in each ch but skip over every 3rd ch across the row = 80-88-96-106-116 tc on row. Place a marker at each side = 40-44-48-53-58 tc between markers. Then crochet around with 1 tc in each tc – see Crochet info-1.When the piece measures 15 and 25 cm inc 1 tc at each side of each marker – inc 1 tc by crocheting 2 tc in 1 tc = 88-96-104-114-124 tc on row.
When the piece measures 33-34-35-36-37 cm crochet the next row as follows: 1 sl st in each of the first 4 tc, 38-42-46-51-56 tc, turn piece and crochet back. Crochet Front and Back separately – read Crochet info-2.

Front: = 38-42-46-51-56 tc. Bind off for armhole at each side every row – see decreasing tips: 2 tc 0-0-1-2-3 times and 1 tc 1-2-2-2-2 times = 36-38-38-39-40 tc. When the piece measures approx. 43-45-47-49-51 cm (adjust so that 2 complete stripes remain – 4 rows before finished measurements) bind off for the neck as follows: Crochet 11-12-12-12-12 tc, turn the piece and crochet back. Bind off 1 tc at neck edge every row – see decreasing tips: 3 times = 8-9-9-9-9 tc remain on shoulder. Cut yarn when the piece measures 52-54-56-58-60 cm.
Repeat on the other side.

Back: Crochet 1 sl st in each of the first 4 tc after the marker, 38-42-46-51-56 tc, turn piece and crochet back (= 6 tc bound off at each side).
Bind off for armhole as on front = 36-38-38-39-40 tc. When the piece measures 50-52-54-56-58 cm (1 row remains) crochet 1 row over only 8-9-9-9-9 tc at each side (do not crochet over the center 20-20-20-21-22 sts = neckband). Cut yarn, the piece measures approx. 52-54-56-58-60 cm.

Sleeve: Ch 42-45-45-48-51 with 1 strand burgundy Muskat + 1 strand Cotton Viscose and join into a ring with 1 sl st. Follow Stripe pattern-sleeve – see instructions above.
Row 1: Crochet 1 tc in every ch but skip over every 3rd ch across row = 28-30-30-32-34 tc on row.
Place a marker at the beginning of row. Crochet around with 1 tc in each tc from previous row.
When the piece measures 20 cm inc 1 tc at each side of the marker approx. every 8-8-5-4-4 cm a total of 4-4-5-6-6 times – inc 1 tc by crocheting 2 tc in 1 tc = 36-38-40-44-46 tc.
When sleeve measures 48-47-45-44-42 cm crochet the next row as follows: 1 sl st in each of the first 4 tc, 30-32-34-38-40 tc, turn piece and crochet back. Now bind off for sleeve cap every row – see decreasing tips: bind off 2 tc at each side until the piece measures 56 cm.

Assembly: Sew shoulder seams edge to edge.
Neckband: Crochet 1 row tc around the neck with 1 strand red Muskat nr 12 + 1 strand Cotton Viscose. Sew in sleeves edge to edge.

SPECIAL ABBREVIATION: V-st = (dc, ch 1, dc) all in stitch or space specified.

BACK: Ch 76 (88, 94).

Row 1 (Right Side): V-st in 5th ch from hook, * skip next 2 ch, V-st in next ch; rep from * to last 2 ch; skip next ch, dc in last ch; turn – 24 (28, 30) V-sts.

Row 2: Ch 3, V-st in the ch-1 sp of each V-st across; dc in top of ch-3; turn. Rep Row 2 for pat until about 8½" from beg, end wrong side row.

Shape Armholes: Sl st to the ch-1 sp of 2nd (2nd, 3rd) V-st; ch-3, 20 (24, 24) times, dc in ch-1 sp of next V-st; turn, leaving rem sts unworked. Work even in pat until armholes measure about 8 (8½, 9½)".

Shape Neck/Shoulders: Ch 3, 5 (6, 6) times, dc in ch-1 sp of next V-st. Fasten off. Skip next 8 (10, 10) V-sts of last long row, join in ch-1 sp of next V-st; ch 3, 5 (6, 6) times, dc in top of ch-3. Fasten off.

RIGHT FRONT: Ch 25 (31, 34).

Row 1 (Right Side): Work same as back over 7 (9, 10) V-sts.

Shape Center Edge-Row 2: Ch 3, V-st in ch-1 sp of each V-st across AND in sp between last Vst and beg ch, dc in top of ch-3; turn – 8 (10, 11) V-sts.

Row 3: Work 1 row even.

Rep Rows 2 and 3 four times – 12 (14, 15) V-sts. Work even until front measures same as back to armholes, end wrong side row.

Shape Armhole: Ch 3, 10 (12, 12) times, dc in ch-1 sp of next Vst; turn, leaving rem sts unworked. Work 4 rows even in pat.

Shape Neck - Rows 1 and 3 (Wrong Side): Ch 3, work in pat to last V-st; dc in ch-1 sp of last V-st; turn – one V-st dec each row.

Rows 2 and 4 (Right Side): Sl st to first ch-1 sp, ch 3, work in pat to end; turn – one V-st dec each row.

Row 5: Rep Row 1 – 5 (7, 7) V-sts.

Sizes Medium and Large Only-Row 6: Rep Row 4 – (6, 6) V-sts.

All Sizes: Work even in pat until armhole measures same as back. Fasten off.

LEFT FRONT: Work same as Right Front, reversing shapings.

SLEEVES: Ch 34 (37, 37).

Rows 1-3: Work same as back over 10 (11, 11) V-sts.

Row 4: Ch 3, V-st in first dc, V-st in ch-1 sp of each V-st across; V-st in sp between last V-st and beg ch, dc in 3rd ch of ch-3; turn – 12 (13, 13) V-sts.

Rows 5-7: Work 3 rows even.

Rep last 4 rows until there are 20 (21, 23) V-sts. Work even until 17 (18, 18½)" from beg. Fasten off.

FINISHING: Sew shoulder seams. Place center of sleeve tops at shoulder seams; sew in place, sewing upper ¾ (¾, 1½)" of sleeve to skipped sts at underarm. Sew sleeve and side seams.

Body Ruffle-Rnd 1: With right side facing, join yarn at a side seam; ch 1, sc evenly around entire outer edge, increasing or decreasing as necessary to keep work flat; join with a sl st to first sc.

Rnd 2: Ch 8, sl st in 3rd ch from hook, twice all in first sc, * 3 times all in next sc; rep from * around; join with a sl st in 5th ch of ch-8. Fasten off. Weave in ends. Sew snap fastener to back of Rnd 1 at beg of neck shaping.

Sleeve Ruffle-Rnd 1: With right side facing, join yarn at seam; ch 1, sc evenly around; join.

Rnd 2: Ch 7, sl st in 3rd ch from hook, twice all in first sc, * 3 times all in next sc; rep from * around; join in 4th ch of ch-7. Fasten off. Weave in ends.











BACK: Ch 69.
Row 1 (Right Side): Sc in 2nd ch from hook, ch 2, skip next ch, sc in next ch, * 4 times **, ch 5, skip next 4 ch, sc in next ch; rep from * to last 2 ch, end at **; ch 2, skip next ch, sc in last ch; turn.
Row 2: Ch 7, (tr, ch 3, tr) all in ch-2 sp – beg half shell made; ch 4, skip next 2 sc, sc in next sc, * ch 4; (tr, 4 times) all in next ch-5 sp – shell made; ch 4, skip next 2 sc, sc in next sc; rep from * to last ch-2 sp; ch 4; (tr, twice) all in sp – half shell made; turn.
Row 3: Ch 1, sc in tr, ch 2, twice, sc in ch-4 sp, * ch 5, sc in ch-4 sp, ch 3 **, 4 times, sc in ch-4 sp; rep from * to last 2 sps, end at **; twice, ch 2, sc in 4th ch of ch-7; turn.
Row 4: Ch 1, sc in ch-2 sp, ch 4, * shell in ch-5 sp, ch 4, skip 2 sps, sc in next sp **, ch 4; rep from * across,
end at **; turn.
Row 5: Ch 5, sc in ch-4 sp, * 4 times, ch 3, sc in ch-4 sp **, ch 5, sc in ch-4 sp; rep from * to last sc, end at **; ch 2, dc in sc; turn.
Row 6: Beg half shell, ch 4, skip next 2 sps, sc in next sp, * ch 4, shell in ch-5 sp, ch 4, skip next 2 sps, sc in next sp; rep from * to last 3 sps; ch 4, half shell in 3rd ch of ch-5; turn.
Rows 7-22 (7-26): Rep Rows 3-6. Fasten off.
RIGHT FRONT: Ch 35.

Rows 1-18 (1-22):Work in pat same as for back.
Shape Neck-Row 19 (23): Sl st to ch-4 sp; ch 1, sc in same sp, ch 3, sc in next ch-4 sp, ch 3, 4 times, sc in next ch-4 sp, ch 5, sc in next ch-4 sp, twice, ch 2, sc in 4th ch of ch-7; turn.
Row 20 (24): Ch 1, sc in sc, ch 4, shell in ch-5 sp, ch 4, skip 2 sps, sc in next sp, ch 4, skip 2 sps, half shell in last sp; turn.
Row 21 (25): Sl st to ch-4 sp; ch 1, sc in same sp, ch
3, sc in next ch-4 sp, 4
times, ch 3, sc in next ch-4 sp, ch 2, dc in last sc; turn.
Row 22 (26): Beg half shell, ch 4, skip next 2 sps, sc in next sp, ch 4, half shell in last sp. Fasten off.
LEFT FRONT: Ch 35.
Rows 1-18 (1-22):Work in pat same as for back. Shape Neck-Row 19 (23): Ch 1, sc in tr, ch 2, twice, sc in ch-4 sp, ch 5, sc in ch- 4 sp, ch 3, 4 times, sc in ch- 4 sp, ch 3, sc in ch-4 sp, turn.
Row 20 (24): Beg half shell in first sp, ch 4, skip 2 sps, sc in next sp, ch 4, shell in ch-5 sp, ch 4, sc in last sc; turn.
Row 21 (25): Ch 5, sc in ch-4 sp, 4 times, twice; turn.
Row 22 (26): Beg half shell in first sp, ch 4, skip next
2 sps, sc in next sp, ch 4, half shell in 3rd ch of ch-5.
Fasten off.

SLEEVES: Ch 35.
Rows 1-13 (1-17):Work same as back. Shape sides:
Row 14 (18): (Beg half shell, twice) all in ch-2 sp, work in pat to last ch-5; shell in 3rd ch of ch-5; turn.
Row 15 (19): Ch 1, sc in tr, * ch 2, 4 times **, sc in ch-4 sp, ch 5, sc in ch-4 sp; rep from * to ch-7, end at ** AND work last ch as ch-2 instead of ch-3; sc in 4th ch of ch-7; turn.
Row 16 (20): Rep Row 6.
Rows 17-24 (21-28): Rep Rows 3-6. Fasten off.

FINISHING: Sew side and shoulder seams. Set in sleeves.

Edging/Buttonholes: With right side facing, join yarn in right front corner; ch 1, work sc evenly all around; join with a sl st in first sc. Mark right front edge for 4 buttonholes.
Next Rnd: Ch 1, 4 times, sc in each sc around, increasing or decreasing at shaped edges to keep work flat; join. Fasten off. Sew buttons to left front edge to correspond to buttonholes.
Sleeve Edging: With right side facing, join yarn at seam; ch 1, work sc evenly around; join to first sc.
Next Rnd: Ch 1, sc in each sc around; join. Fasten off. Weave in ends.

جزاك الله كل خير وربنا يكرمك ويوفقك للى فيه الخير والله مجموعه ممتازه
وياريت حد يتبرع ويترجم اى موديل